Detailed instructions for use are in the User's Guide.
[. . . ] However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient of relocate the receiving antenna. · Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. [. . . ] No part of this document may be copied, reproduced, or transmitted by any means, for any purpose without prior written permission from ViewSonic Corporation.
Electronic Warranty Registration
To meet your future needs, and to receive any additional product information as it becomes available, please register your projector's warranty on the Internet at: http://www. viewsonic. com
For Your Record Document Number: Model Number: Product Name: Purchase Date: Serial Number:
A-CD-PJ552 / A-CD-PJ562 VS10386/VS10385 ViewSonic PJ552/PJ562
07/19/04 A
ViewSonic PJ552 / PJ562
1
User Information for all Countries
Notice: Use the cables which are included with the projector or specified.
Contents of package
STANDBY/ON VIDEO RGB SEARCH ASPECT AUTO BLANK
(1) Projector (2) Remote control with two AA batteries (3) Power cord (4) RGB cable (5) Filter cover for bottom-up use (6) User's manuals (7) Soft case
(4)
MAGNIFY ON
HOME
PAGE UP
VOLUME
END OFF FREEZE
PAGE DOWN
MUTE
KEYSTONE
POSITION
MENU
ENTER
ESC
RESET
(1)
(2)
(3)
(5)
(6)
(7)
NOTE · Keep the original packing materials for future reshipment. For moving the projector, be sure to use the original packing material. Safety Guide" to operating the unit please your understanding
store them in a
Notice: Use the cables which are included with the projector or specified.
WARNING CAUTION
NOTE ·
Trademark acknowledgment
ViewSonic PJ552 /PJ562
2
ViewSonic PJ552 / PJ562
3
2
ViewSonic PJ552 / PJ562
4
ViewSonic PJ552 / PJ562
5
U
a
ViewSonic PJ552 / PJ562
6
024
68
ViewSonic PJ552 / PJ562
7
ViewSonic PJ552 / PJ562
8
is
ed to
ViewSonic PJ552 / PJ562
9
ViewSonic PJ552 / PJ562
10
ViewSonic PJ552 / PJ562
11
ViewSonic PJ552 / PJ562
12
ViewSonic PJ552 / PJ562
13
ace
ViewSonic PJ552 / PJ562
14
ViewSonic PJ552 / PJ562
15
off all devices prior to connecting them to the projector.
ViewSonic PJ552 / PJ562
16
ed
V ewSonic PJ552 / PJ562 i
17
ViewSonic PJ552 / PJ562
18
ViewSonic PJ552 / PJ562
19
ViewSonic PJ552 / PJ562
20
ViewSonic PJ552 / PJ562
21
ViewSonic PJ552 / PJ562
22
ViewSonic PJ552 / PJ562
23
ViewSonic PJ552 / PJ562
24
ViewSonic PJ552 / PJ562
25
ViewSonic PJ552 / PJ562
26
ad.
ViewSonic PJ552 / PJ562
27
ViewSonic PJ552 / PJ562
28
ViewSonic PJ552 / PJ562
29
ViewSonic PJ552 / PJ562
30
ViewSonic PJ552 / PJ562
31
ViewSonic PJ552 / PJ562
32
for
ViewSonic PJ552 / PJ562
33
for
ViewSonic PJ552 / PJ562
34
ViewSonic PJ552 / PJ562
35
automatic signal search
ViewSonic PJ552 / PJ562
36
GHOST
FACTORY RESET
ViewSonic PJ552 / PJ562
37
ViewSonic PJ552 / PJ562
38
PRJ-RLC-015
ViewSonic PJ552 / PJ562
39
" Please contact your dealer or ViewSonic for the air filter part number. "
ViewSonic PJ552 / PJ562
40
ViewSonic PJ552 / PJ562
41
Troubleshooting
Troubleshooting
Related messages
When the unit's power is on, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below. If the same message is displayed after the treatment, or if a message other than the following appears, please contact your dealer or service company. Although these messages will be automatically disappeared around several minutes, it will be reappeared every time the power is turned on. Message
To maximize performance, lamp replacement is recommended.
Description
After the lamp running reaches 2000 hours, the warning message is displayed, but it won't shut the unit off. If we push any button while displaying the message, the message disappear. Please clear or change the air filter by referring to the section "Air filter". After caring for the air filter, Please be sure to reset the filter timer.
CLEAN THE AIR FILTER POWER OFF FIRST, THEN CLEAN THE AIR FILTER. AFTER CLEANNING THE AIR FILTER, RESET THE FILTER TIMER.
NO INPUT IS DETECTED ON ***
There is no input signal.
Please con rm the signal input connection, and the status of the signal source.
SYNC IS OUT OF RANGE ON *** fH *****kHz fV *****Hz
The horizontal or vertical wavelength of the inputted signal is outside of the response parameters of this unit.
Please con rm the specs for this unit or the signal source specs.
The internal portion temperature is rising.
Please turn the power OFF, and allow the unit to cool down at least 20 minutes. After having con rmed the following items, please turn the power ON again. · Is the air · Does the peripheral temperature exceed 35°C?· If the same indication is displayed after the treatment, please set the HIGH at the FAN SPEED of the item SERVICE of the OPTION menu.
CHECK THE AIR FLOW
ViewSonic PJ552 / PJ562
42
ViewSonic PJ552 / PJ562
43
ViewSonic PJ552 / PJ562
44
ViewSonic PJ552 / PJ562
45
ViewSonic PJ552 / PJ562
46
ViewSonic PJ552 / PJ562
47
s
786, 432 pixels (1024 horizontal x 768 vertical)" , Lamp Part number. " PRJ-RLC-015. Air filter part number: "Please contact your dealer or ViewSonic for the air filter part number. "
5
4
PRJ-RLC-015 NJ9702
ViewSonic PJ552 / PJ562
48
ViewSonic PJ552 / PJ562
49
Customer Support
For technical support or product service, see the table below or contact your reseller. NOTE: You will need the product serial number.
Country/ Region
United States
Web site
www. viewsonic. com/support www. viewsonic. com/support
T = Telephone F = FAX
T: (800) 688-6688 F: (909) 468-1202 T: (800) 688-6688 F: (909) 468-1202
Email
service. us@ viewsonic. com service. ca@ viewsonic. com service. eu@ viewsoniceurope. com service. eu@ viewsoniceurope. com
Canada United Kingdom Europe, Middle East, Baltic countries, and North Africa Australia and New Zealand Singapore/ Malaysia/Thailand South Africa/ Other countries Hong Kong
www. viewsoniceurope. com T: 0800 833 648 F: (01293) 643910 www. viewsoniceurope. com Contact your reseller
www. viewsonic. com. au www. viewsonic. com. sg www. viewsonic. com www. hk. viewsonic. com
T: +61 2 9906 6277 F: +61 2 9906 6377 T: 65 273 4018 F: 65 273 1566 T: 886 2 2246 3456 F: 886 2 8242 3668 T: 886 2 2246 3456 F: 886 2 8242 3668
service@au. [. . . ] 2 Damage, deterioration or malfunction resulting from:
3 Removal, installation, and set-up service charges.
a. Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product modification, or failure to follow instructions supplied with the product. e. Causes external to the product, such as electric power fluctuations or failure. h. Any other cause which does not relate to a product defect.
How to get service:
1 . For information about receiving service under warranty, contact ViewSonic Customer Support. [. . . ]