User manual VIEWSONIC PJD6243

[. . . ] PJD6243 DLP Projector User Guide IMPORTANT: Please read this User Guide to obtain important information on installing and using your product in a safe manner, as well as registering your product for future service. Warranty information contained in this User Guide will describe your limited coverage from ViewSonic Corporation, which is also found on our web site at http://www. "Antes de operar su equipo lea cu idadosamente las instrucciones en este manual" Model No. VS14425 Compliance Information FCC Statement This device complies with part 15 of FCC Rules. [. . . ] When the Panel Key Lock is on, no control keys on the projector will operate except Power. Select Yes to confirm. Important · If you press Power to turn off the projector without disabling panel key lock, the projector will still be in locked status the next time it is turned on. 19 Setting the presentation timer The presentation timer can indicate the presentation time on the screen to help you achieve better time management when giving presentations. Go to the Option > Presentation Timer menu and press on the projector or Enter on the remote control to display the Presentation Timer page. Important · If the timer is already on, the timer will restart whenever the Timer Period is reset. 3. Press to highlight Display Timer and choose if you want the timer to show up on the screen by pressing / . Selection Always 1 Min/2 Min/3 Min Never Description Displays the timer on screen throughout the presentation time. Press to highlight Timer Position and set the timer position by pressing Top-Left Bottom-Left Top-Right Bottom-Right 5. Press to highlight Timer Counting Direction and select your desired counting direction by pressing / . Selection Count Up Count Down Description Increases from 0 to the preset time. To activate the presentation timer, press to highlight Start Counting and press on the projector or Enter on the remote control. Highlight Yes and press on the projector or Enter on the remote control to confirm. 20 Menu operation The projector has multilingual on-screen display menus that allow you to make image adjustments and change a variety of settings. Auto Keystone Start up Screen Start up Screen Screen Capture Screen Capture Delete Off(Blank), ViewSonic, Screen Capture, Blue, white Active VGA Out Active audio Out Lan control setting DHCP IP address Subnet Mask Default Gatewqy DNS Apply 21 Quick Power Off Mac Address 22 How to operate 1. Press MENU on the projector or Menu on the remote control to open the OSD menu. After selecting the desired main menu item, press to enter sub-menu for feature setting. Press MENU on the projector or Menu on the remote control, the screen will return to the main menu. To exit OSD, Press MENU on the projector or Menu on the remote control again. The OSD menu will close and the projector will automatically save the new settings. Picture Color Mode There are many factory presets optimized for various types of images. Reference Mode Select a picture mode that best suits your need for the image quality and further finetune the image. Contrast Set the difference between light and dark areas. 23 Color Setting Adjust the color temperature. At higher temperature the screen looks colder; at lower temperature, the screen looks warmer. If you select "User", then you can change the intensity of each of 3 color (Red, Green, Blue) to customize user color temperature. User Color User Color provides six sets (RGBCMY) of colors to be adjusted. When you select each color, you can independently adjust its range, hue, saturation and gain according to your preference. [. . . ] If the problem persists, contact your local reseller or service center. Please refer to "LED Indicator Messages" as well. Start-up problems If no lights turn on: · Be sure that the power cord is securely connected to the projector and the other end is plugged into an outlet with power. · Unplug the power cord and wait for a short while, then plug it in and press the power button again. Image problems If the searching source is displayed: · Press SOURCE on the projector or Source on the remote control to select an active input source. · For a computer connection, ensure your notebook computer's external video port is turned on. [. . . ]