Detailed instructions for use are in the User's Guide.
[. . . ] VP912b VP912s
LCD Display
User Guide Guide de l'utilisateur Bedienungsanleitung Guía del usuario Guida dell'utente Guia do Usuário Användarhandbok Käyttöopas Podr cznik u ytkownika
Uzivatelská píruka
Full 19. 0" Diagonal Viewable Screen
Contents
Product Registration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Getting Started
Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Quick Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] If the power button is pressed the message Power Button Locked will display for 5 seconds. With or without this setting, after a power failure, your LCD display's power will automatically turn ON when power is restored. Power Button Unlock: Press and hold [1] and the down arrow again for 10 seconds.
ViewSonic
VP912b/VP912s
7
Adjusting the Screen Image
Use the buttons on the front control panel to display and adjust the OnView® controls which display on the screen. The OnView controls are explained at the top of the next page and are defined in "Main Menu Controls" on page 9.
Main Menu with OnView controls
Front Control Panel shown below in detail
Scrolls through menu options and adjusts the displayed control. Displays the Main Menu or exits the control screen and saves adjustments. Power light Green = ON Orange = Power Saving
Power On/Off
ViewSonic
VP912b/VP912s
8
Do the following to adjust the screen image:
1
To display the Main Menu, press button [1].
NOTE: All OnView menus and adjustment screens disappear automatically
after about 15 seconds. This is adjustable through the OSD timeout setting in the setup menu.
2 3
To select a control you want to adjust, press or to scroll up or down the Main Menu. A control screen like the one shown below appears.
The command line at the bottom of the control screen tells what to do next from this screen. You can toggle between control screens, adjust the selected option, or exit the screen.
4 5
To adjust the control, press the up or down buttons. To save the adjustments and exit the menu, press button [1] twice.
The following tips may help you optimize your display: · Adjust your computer's graphic card so that it outputs a video signal 1280 x 1024 @ 60Hz to the LCD display. Size (Horizontal Size) adjusts the width of the screen image.
H. /V. Position (Horizontal/Vertical Position) moves the screen
image left or right and up or down.
ViewSonic
VP912b/VP912s
11
Control
Explanation
Fine Tune sharpens the focus by aligning the text and/or graphic characters. Sharpness adjusts the clarity and focus of the screen image.
Setup menu displays the menu shown below:
Language allows you to choose the language used in the menus and control screens. Resolution Notice allows you to enable or disable this notice.
If you enable the Resolution Notice shown above and your computer is set at a resolution other than 1280 x 1024, the following screen appears.
ViewSonic
VP912b/VP912s
12
Control
Explanation
Input Priority If multiple computers will be connected to the display, this function can be used to select which computer has priority Depending on the selected Input Priority, the display will do a one time detection for available inputs when first powered on.
For example: If the Input Priority setting is D-SUB1=>D-SUB2=>DVI, then the first priority will be given to D-SUB1 when the display turns on. If there is no video signal on D-SUB1, then the next priority will be given to D-SUB-2, etc. . . In the case of only one signal being present at the three inputs, then the display will automatically detect and display that signal. In this case, the input will return to the last setting when the display is first turned on. The user will need to control all the port settings manually under this condition. Inputs can be switched quickly by pressing the "Up" arrow button on the front panel controls.
OSD Position allows you to move the on-screen display menus and control screens. OSD Timeout sets the length of time the on-screen display screen is displayed. For example, with a "30 second" setting, if a control is not pushed within 30 seconds, the display screen disappears.
OSD Background On/Off allows you to turn the On-Screen Display
background On or Off.
OSD Pivot This function is used to rotate the OSD menu, when the display is changed from Landscape to Portrait mode. Memory Recall returns the adjustments back to factory settings
if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual.
ViewSonic
VP912b/VP912s
13
Other Information
Specifications
LCD
Type Color Filter Glass surface 19" (full 19" viewable diagonal area), TFT (Thin Film Transistor), Active Matrix SXGA LCD, 0. 294 mm pixel pitch RGB vertical stripe Anti-Glare RGB analog (0. 7/1. 0 Vp-p, 75 ohms) Composite Sync, Separate Sync, Sync on Green TMDS Digital (100ohms) fh:30-82 kHz, fv:50-85 Hz Up to 1280 x 1024 Non-interlaced Power Macintosh up to 1280 x 1024 1280 x 1024 @ 60, 70, 72, 75 Hz 1024 x 768 @ 60, 70, 72, 75, 85 Hz 800 x 600 @ 56, 60, 72, 75, 85 Hz 640 x 480 @ 60, 75, 85 Hz 720 x 400 @ 70 Hz 100-240 VAC, 50/60 Hz (auto switch) 376. 3mm (H) x 301. 1mm (V) 14. 8" (H) x 11. 85" (V) 32° F to + 104° F (0° C to + 40° C) 10% to 90% (no condensation) To 10, 000 feet -4° F to + 140° F (-20° C to + 60° C) 10% to 90% (no condensation) To 40, 000 feet
416 mm (W) x 460mm (H) x 238 mm (D) 16. 4" (W) x 18. 1" (H) x 9. 4" (D) 416 mm (W) x 341 mm (H) x 65 mm (D) 16. 4" (W) x 13. 4" (H) x 2. 6" (D) 16. 51 lb (7. 5 kg) 11. 2 lb (5. 1 kg)
Input signal
Video Sync
Compatibility Resolution
PC Macintosh1 Recommended and supported
Power Display area Operating conditions Storage conditions Dimensions
Voltage Full Scan Temperature Humidity Altitude Temperature Humidity Altitude
Physical LCD display only
Weight Regulations
Physical LCD display only
UL, FCC-B, cUL, CE, CB MPRII, NOM, TUV/GS, TUV ERGO (covers ISO13406-2 & MPRII), TCO'03 (VP912s), TCO'99 (VP912b), GOST-R+20 ORIGINAL COPIES HYGIENIC, SASO PCBC, VCCI, BSMI, CCC, (PSB), (C-TICK), TUV-S Green Mark, ENERGY STAR® On Active Off Normal <2W (green LED) (orange LED)
Power saving modes
Preset Timing Mode (pre-adjusted to VESA® 1280 x 1024 @ 60 Hz)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in permanent damage to the LCD display.
1
Macintosh computers older than G3 require a ViewSonic®, Macintosh adapter. [. . . ] Always use the appropriate AC cord that is certified for the individual country. Electric Appliance Control Act
IMPORTANT NOTICE CONCERNING POWER CORD SELECTION
The power cord set for this unit has been enclosed and has been selected according to the country of destination and must be used to prevent electric shock. Use the following guidelines if it is necessary to replace the original cord set, or if the cord set is not enclosed. The female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below):
Figure A1
Figure A2
For the United States and Canada
In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled. [. . . ]