User manual WACOM BIZTABLET

[. . . ] English User's Guide CTF-220 Contents Precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Component names and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Tablet Driver Setup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [. . . ] Wacom will not bear any responsibility for contingent damages (such as loss of business profits, suspension of operations, alterations to and disappearance of data, etc. ) caused by use of, or inability to use, this product. Wacom will not bear any responsibility for damage resulting from the use of this product in a fashion other than as explained in this user guide. When using the product, make sure that the room is sufficiently illuminated and be careful not to get your face too close to the screen. Regarding warranty of the product Wacom warrants the product, to the original consumer purchaser, except software, to be free from defects in materials and workmanship under normal use and service as long as the product remains in production, but not less than one (1) year, from the date of original retail purchase, as evidenced by a copy of the receipt or a registration card that has been returned to Wacom within 30 days of purchase. Regarding Trademarks Windows is a trademark of Microsoft Corporation, registered in the United States and other countries. Precautions Checking Packed Components In your package you will find the following items. Pen Tablet (main body) English User's Guide Tablet driver CD-ROM User's Guide (this manual) Component names and functions USB Connector Connect to a USB port of your computer. FunctionKey By default, the customizable FunctionKeys are set to perform the FORWARD and BACK functions within most Internet browsers. Status LED Active area You can use pen inside of it. Lights up depending on the condition of the tablet, as indicated below: Orange: the unit is properly connected and is operating normally. Green: the pen switch becomes active while the pen is on the work screen. Tablet Driver Setup Before installation, connect the BizTablet USB cable to your computer . Insert the Tablet Driver CD-ROM into the CD-ROM drive of your computer and the install menu should appear. If the menu does not appear, double-click on the Install. exe icon located on the CD-ROM. If you must renew your driver, click immediately Restart System and your computer will automatically restart. Refer to "Using the Control Panel" on page 12, open the control panel and adjust the pen settings and positions. If prompted to install drivers for the USB Human Interface Device, insert the Windows 98SE CD, click OK, and enter the location of the Windows CAB files (e. g. , D:\WIN98). Note that the files may be located on your hard disk in the C:\WINDOWS\OPTIONS\CABS folder. Uninstalling the Tablet Driver Click on the Windows Start button and open the control panel. Select Pen Tablet from the list and click the Modify (Add) and Delete button. When Windows is restarted, the driver will be deleted. Basic Operation The Parts of the Pen and Their Functions Second Side Switch With one touch of the second side switch, functions that have been previously established become functional(double click by default). Pen Tip Side Switch With one touch of the side switch, functions that have been previously established become functional(right click by default). · You can change the position of the screen pointer by moving the tip of the pen. · By varying the amount of pressure applied, the boldness of lines and the size of points can be adjusted. How to hold and place the Pen Hold the pen as you would a pencil. Make sure the side switch is in a convenient location where you can press it with your thumb or forefinger, but won't accidentally press it while drawing. When the pen is not in use and it is left on the tablets active area, nonBizTablet input devices such as mice cannot be used. Therefore, when not in use, the pen should be placed somewhere other than on the tablets active area. Tablet Active Area The area where the pen is used is called the active area, and the screen where the manipulations of the pen are displayed is called the display area. Default Settings *The active area and the display area are set up on a 1:1 scale. *The entire work screen is set up as a work area. The functional settings of the work screen may be changed. For details, please refer to "Using the Control Panel" Page12 Moving the Pointer By raising the pen a little above the tablet and moving it, you can move the position of the screen pointer. To select an icon or folder on the screen, move the pen tip while watching the screen and position the pointer over the desired item. Clicking Tap on the tablet lightly once with the tip of the pen to click. Double-clicking Tap in the same place twice quickly with the tip of the pen to double-click. The settings of the side switch and second side switch may be changed. to open a dialog box where you can set the portion of tablet area. 2 Scaling 3 Tablet area Portion: 4 Default Returns settings to their factory defaults. Portion of screen area The tracking options in the Pen mode details dialog box allow you to define which portion of the display screen your tablet will map. Portion of tablet area The tracking options in the Pen mode details dialog box allow you to define the tablet area that will be mapped to the screen area. Tablet tab To change the settings of the Function Keys, you can click tablet tab of the properties of pen tablet. Troubleshooting If you encounter problems with Biz Tablet, refer to the following tablets. Your problem may be described here, and you can try the solution offered. Problem The pen nib produces a click even when only very lightly coming in contact with the tablet. The pen nib and side switch do not work. Hint Use the control panel to set the pen nib sensitivity to Firm setting. When the status lamp turns green in response to the pen nib being moved to close proximity to the tablet, either the pen or the tablet is probably defective. Verify that the side switch setting in the control panel isnt set to Not Available. [. . . ] Also, if possible, uninstall all non-standard device drivers, leaving only the standard drivers, and then check the operations of the tablet. Supplementary Information Removing Stains If the product casing or pen becomes soiled, wipe off with a clean, soft cloth. If this fails to remove the stains, soak a clean, soft cloth with a water-diluted detergent mixture, wring thoroughly and wipe off. If the protective covering for the tablet becomes soiled, wipe with a dry, soft cloth. If the stain is difficult to remove, try moistening the cloth slightly. Specifications Reading range Reading resolution: Accuracy: Reading hight: Report rate: Interface: Tablet Physical size(WxDxH): Weight: Power consumption: Pressure level: Usage environment Temprature: Storage temprature: Humidity: Storage humidity: Certification and compliance: 81. 2×58 mm 0. 025 mm ± 0. 5 mm 3 mm Maximum 100 point per second USB VCCI, CE, C-Tick, BSMI, MIC 155. 8 x 138. 9 x 13. 5 mm 200g, approximately Maximum 40 mA 512 levels 5 40 -10 60 20 80 % (conditions where condensation does not form) 20 90 % (conditions where condensation does not form) 148x12. 5 mm 512 level 12g, approximately POM Pen Physical size: Pressure level: Weight: Tip refill type: Make Notes and other Marks Quickly and Easily with JustWrite Office Installing JustWrite Office JustWrite Office, a tool that is compatible with Microsoft PowerPoint, Microsoft Word and Microsoft Excel, is contained within the accompanying tablet driver CD-ROM. [. . . ]