User manual WACOM DTI-520UB

[. . . ] The following symbols appear throughout this user guide in order to ensure safe use of the DTI520UB (hereafter referred to as "DTI-520UB, " "the product" or "this product"). Please read these items carefully and always heed the Warning and Caution items when using your DTI-520UB. Warning Caution This symbol indicates an item that, if ignored when handling the product, could lead to the loss of life or serious injury. This symbol indicates an item that, if ignored when handling the product, could lead to injury or damage to personal property. Indicates that it is important to be careful when taking the action or actions noted. [. . . ] Horizontal Vertical Synchronizing Synchronizing Signal Signal Turned On Yes Yes Stand-by Mode No Yes Suspend Mode Yes No Off Mode No No Computer Activity Picture Signal Yes No No No Power Consumption 23W or less Less than 2W Less than 2W Less than 1W Power Lamp Blue Orange/Blue* Orange/Blue* Orange Caution:*Depending on the specifications and settings of your computer and video card, when in standby and suspend modes, the power lamp may only light up orange. 14 Protrusion of the Picture from the LCD Panel and the Blurring of Characters. . . Caution: This setting is effective when the product and computer are connected by a RGB cable. Depending on the type of computer and graphics board, the Auto-Adjust function is sometimes not able to operate at full power, resulting in the picture blurring and protruding from the LCD panel. Procedure: 1 Open the Tablet Control Panel (see page 21) and select the Calibrate tab. 1 2 Click on the Calibrate. . . icon. 4 Adjusut the pitch level so the pattern 5 In the OSD Menu, select the Phase 6 Adjust the phase level so the 7A f t e r adjusutment pattern shows clearly. P. 16, 18 completing these adjustments, press the ENTER and MENU buttons to exit the OSD Menu. press the ENTER and MENU buttons to exit the OSD Menu. 2 8 Click on the CANCEL button or Adjustment pattern for pitch and phase Hint: For Windows 2000, the pitch and phase may be calibrated after the Exit Windows screen is displayed. If the frequency needs to be calibrated, light and dark vertical stripes will appear in the dark areas of the screen. If the tracking needs to be calibrated, light and shade will appear horizontally in the dark areas of the screen (for 1024 x 768-bit resolution). This method is recommended in situations where the tablet driver has not been installed. 15 Button Functions Menu button Opens or closes the OSD Menu. - buttons, + buttons You can select an option that can be activated. After activatng a selected option, press the + button to increase a selected item value, and press the button to decrease it. ENTER Button Activates or deactivates the selected OSD menu otion. Also switches the image input from the RGB ­ RGB cable and the image input from the composite video cable. Adjusting the Brightness and Contrast of the Display Adjusting picture quality and setting up the display are accomplished by using on-screen buttons to establish and change adjustment items and values. Select the items to be adjusted and their desired settings. How to Use the OSD Menu 1 Click on the Menu button to display the Main Menu Settings screen. Example: Adjusting the brightness 2 Click on the button and the- button and select the items to be adjusted. When the option you want to adjust is highlighted, press the ENTER button. 3 Use the + and - buttons to adjust numerical values and other items. 4 After making your change, press the ENTER button to save. 5 To exit, press the Menu button. 16 Types of OSD Menus Some menu screen displays may vary depending on whether a RGB cable or a video cable is connected. The following screens explained in Common Screens below are the same ones regardless of the connection method. Common Screens Contrast Select to increase or decrease image contrast. Language Select to choose a language option for the OSD: English, Deutsch, Francais, Espanol, Italiano, or Japanese. Brightness Select to increase or decrease image brightness. Backlight Selects to increase or decrease the backlight brightness level. Color Provides settings for 9300°, 6500°, and 5000°Kelvin. Also provides a User option that enables you to adjust red, blue and green independently. Selecting DIRECT displays the received signal as it is without any adjustment. Choose a setting to work with and press Enter to activate your selection. In the User Adjustment window, change red, blue and green to calibrate color. To exit, select the icon ' '. Menu Position Select to move the OSD menu around the display. Reset Provides two options: Use AUTO ADJUST to reset only the image parameters. Selecting the exit ' 'icon exits the RESEST window without resetting anything. 17 Signal Source Select D-SUB and the image input from the RGB ­ RGB cable displays. Select VIDEO and the image input from the composite video cable displays. Screens that Display with a RGB Cable Connection Horizontal Center(VGA only) Select to move the screen image left or right. To automatically adjust, use the Reset option. Phase (VGA only) Select to reduce or eliminate horizontal distortion lines. To automatically adjust, use the Reset option. Vertical Center (VGA only) Select to move the screen image up or down. To automatically adjust, use the Reset option. Pitch (VGA only) Select to reduce or eliminate vertical distortion lines. To automatically adjust, use the Reset option. Screens that Display with a Video Cable Connection Saturation Sharpness Adjust sharpness of a image. [. . . ] Wacom will pay for return shipping by United Parcel Service or by an equivalent service as chosen by Wacom. Wacom's sole obligation and entire liability under this warranty shall be, at Wacom's option, either the repair or replacement of the defective product or parts thereof of which Wacom is notified during the Warranty Period;provided, however, that you are responsible for (i) the cost of transportation of the product to the designated service location and (ii) any loss or damage to the product resulting from such transportation. Wacom shall have no responsibility to repair or replace the product if the failure of the product has resulted from accident, abuse, misuse, negligence, or unauthorized modification or repair, or if it has been handled or stored other than in accordance with Wacom's storage instructions. Any descriptions, drawings, specifications, samples, models, bulletins, or similar material, used in connection with the sale of the product, shall not be construed as an express warranty that the product will conform or comply with your requirements. [. . . ]