User manual WACOM STU-300

[. . . ] This will also void your warranty and Wacom shall have no responsibility to repair or replace the product. If the LCD screen has been damaged, DO NOT touch any liquid that may be leaking from it; this liquid is an irritant. [. . . ] When LCD panel is operated continuously for long period, a trace of electric charge remains near the electrode inside the LCD, and residual or "ghost" image of the previous image may be observed. (Image Persistence) To avoid image persistence, Wacom recommends the use of a moving screen saver when the screen is turned on but idle. Dust and dirt particles can stick to the pen and cause wear to the display screen surface. Regular cleaning will help prolong the life of your LCD screen surface and pen. Keep the tablet and pen in a clean, dry place and avoid extremes in temperature. Cleaning To clean the LCD signature tablet casing or the pen, use a soft, damp cloth; you can also dampen the cloth using a very mild soap diluted with water. Do not use paint thinner, benzine, alcohol, or other solvents to clean the unit casing or pen. To clean the display screen, use an anti-static cloth or a slightly damp cloth. When cleaning, apply only a light amount of pressure to the display screen and do not make the surface wet. Do not use detergent to clean the display screen; this may damage the coating on the screen. Please note that damage of this kind is not covered by the manufacturer's warranty. 0 Full Speed Cable USB A to Mini B Cover plate Tempered glass with AG coating etching Power Management USB BUS power Power Consumption Less than 1. [. . . ] However, there is no guarantee that interference will not occur in a particular installation. You can determine whether the equipment is causing interference by powering it off. [. . . ]