User manual WHIRLPOOL AKZM 7540/IX INSTRUCTION FOR USE

[. . . ] IMPORTANT SAFETY INSTRUCTIONS YOUR SAFETY AND THAT OF OTHERS IS PARAMOUNT This manual and the appliance itself provide important safety warnings, to be read and observed at all times. This is the danger symbol, pertaining to safety, which alerts users to potential risks to themselves and others. All safety warnings are preceded by the danger symbol and the following terms: DANGER WARNING Indicates a hazardous situation which, if not avoided, will cause serious injury. Indicates a hazardous situation which, if not avoided, could cause serious injury. All safety warnings give specific details of the potential risk present and indicate how to reduce risk of injury, damage and electric shock resulting from improper use of the appliance. Carefully observe the following instructions: - The appliance must be disconnected from the power supply before carrying out any installation work. [. . . ] N. B. : for the list and description of functions, see the specific table at page 13 and at page 14. Within the submenus, browse the various options available by turning the “Browse” knob: the chosen function is highlighted in white in the centre of the screen. If the pre-set values are those desired, turn the “Browse” knob to position the cursor at “Start” and then press ; otherwise, proceed as indicated above to change them. --:-COOK TIME SETTING THE TEMPERATURE/OUTPUT OF THE GRILL 180°C TEMPERATURE 180°C TEMPERATURE --:-COOK TIME No PREHEAT Conventional --:-END TIME No PREHEAT Conventional --:-END TIME Start Start 200°C TEMPERATURE --:-COOK TIME 200°C TEMPERATURE --:-COOK TIME No PREHEAT Conventional --:-END TIME No PREHEAT Conventional --:-END TIME Start Start To change the temperature or output of the grill, proceed as follows: 1. Check that the cursor is positioned next to the temperature value (zone 3); press button to select the parameter to be changed: the temperature values flash. Set the desired value by turning the “Browse” knob and press to confirm. Turn the “Browse” knob to position the cursor at “Start” and then press . The set temperature can also be changed during cooking by following the same procedure. At this point the oven can be switched off by turning the “Functions” knob to 0 (zero), or cooking can be prolonged by turning the “Browse” knob clockwise. When switched off, the display shows the cooling bar which indicates the temperature inside the oven. EN9 PREHEATING THE OVEN 200°C TEMPERATURE --:-COOK TIME 200°C TEMPERATURE --:-COOK TIME No PREHEAT Conventional --:-END TIME No PREHEAT Conventional --:-END TIME Start Start 200°C TEMPERATURE --:-COOK TIME 200°C TEMPERATURE --:-COOK TIME Yes PREHEAT Conventional --:-END TIME Yes PREHEAT Conventional --:-END TIME Start Start If you wish to preheat the oven before inserting food, change the oven’s default selection as follows: 1. Turn the “Browse” knob to position the cursor at preheating. Press button to select the setting: “No” flashes on the display. Change the setting by turning the “Browse” knob: the display shows “Yes”. To confirm your choice, press button . FAST PREHEATING 180°C Frozen Food Defrost Warm Keeping Specials: For defrosting food TEMPERATURE Turn +/- to adjust . . . Start If you wish to preheat the oven quickly before inserting food, change the oven’s default selection as follows: 1. Turn the “Functions” knob to select the fast preheating function. If the proposed temperature is that desired, turn the “Browse” knob to position the cursor at “Start” and then press . To change the temperature, proceed as described in previous paragraphs. An acoustic signal will sound when the oven has reached the set temperature. At the end of preheating, the oven automatically selects the conventional function . If you wish to set a different cooking function, turn the “Functions” knob and select the desired function. SETTING COOKING TIME 180°C TEMPERATURE --:-COOK TIME 180°C TEMPERATURE - 00:30 HH:MM No PREHEAT Conventional --:-END TIME No PREHEAT Conventional 19:01 END TIME Start Start 180°C TEMPERATURE 00:01 HH:MM 180°C TEMPERATURE - 00:30 COOK TIME No PREHEAT Conventional 19:01 END TIME No PREHEAT Conventional 19:20 END TIME Start Start This function can be used to cook food for a set length of time, from a minimum of 1 minute to the maximum time allowed by the selected function, after which the oven switches off automatically. To select the function, turn the “Browse” knob to position the cursor at “COOK TIME”. Press button to select the setting; “00:00” flashes on the display. [. . . ] Use the lowest recommended values to begin with and, if the food is not cooked enough, then move on to higher values. Use the accessories supplied and preferably dark coloured metal cake tins and oven trays. You can also use pans and accessories in pyrex or stoneware, but bear in mind that cooking times will be slightly longer. To obtain best results, carefully follow the advice given in the cooking table for the choice of accessories (supplied) to be placed on the various shelves. Cooking different foods at the same time Using the “FORCED AIR” function, you can cook different foods which require the same cooking temperature at the same time (for example: fish and vegetables), using different shelves. [. . . ]