User manual WHIRLPOOL AWO/C 83121 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL AWO/C 83121. We hope that this WHIRLPOOL AWO/C 83121 user guide will be useful to you.


WHIRLPOOL AWO/C 83121 INSTRUCTION FOR USE: Download the complete user guide (1348 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL AWO/C 83121 MODE D'EMPLOI (443 ko)
   WHIRLPOOL AWO/C 83121 CUADRO DE MANDOS (1301 ko)
   WHIRLPOOL AWO/C 83121 LIBRO DE INSTRUCCIONES (836 ko)
   WHIRLPOOL AWO/C 83121 PRODUCT FICHE (59 ko)
   WHIRLPOOL AWO/C 83121 PROGRAM CHART (1219 ko)

Manual abstract: user guide WHIRLPOOL AWO/C 83121INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Check and eventually adjust the water hardness preset in the washing machine. 1. Detergent dosing values The concentration of detergents available on the market differs considerably. [. . . ] For example, if you save a dosing value for “Cotton” it will be automatically saved for all programmes belonging to the “Generic” group. If you want to change the saved dosing values (because you changed the type of detergent you use, for example) proceed as described above; the previously saved dosing value will be replaced by the new one for the programme group you selected. How to reset the dosing values you saved and go back to the preset values For a specific programme group: Select any programme belonging to the group you want to reset the dosing value for. Press and hold the “Dosing Aid” button for a few seconds - the bottle symbol and the currently saved dosing value are displayed. Press the “Reset/Drain” button briefly “rES” appears on the display for a short period. Press the “Ok” button to confirm. 04/11 - © Copyright Whirlpool Europe s. r. l. All rights reserved Subject to change - Printed in Italy For all programmes: Select programme “Rinse & Spin”. Press and hold the “Dosing Aid” button for a few seconds - the bottle symbol and three horizontal bars appear on the display. Press the “Reset/Drain” button briefly “rES” appears on the display. Press the “Ok” button to confirm and reset all preset values. GB 5019 106 01525 2. Water hardness A - Check your local water hardness Washing with “hard water” requires more detergent than washing with “soft” water, this is why you have to check if the preset water hardness matches your regional water hardness. To find out your local water hardness, ask your local water supply authorities, or use the test strip attached to the Calgon Leaflet provided with your washing machine (if available): Tear off the edge of the paper sleeve and take out the test strip. Dip the strip into tap water for only 1 second. Shake off the excess water immediately. Wait 1 minute to see the result. The test strip contains 4 green squares which will turn to red depending on the hardness of your water: Soft 1 red square 2 red squares Medium 3 or 4 red squares or Hard B - Adjust your water hardness settings 04/11 - © Copyright Whirlpool Europe s. r. l. All rights reserved Subject to change - Printed in Italy The water hardness of your washing machine by default is set to SOFT. If your local water hardness is medium or hard, you must adapt the water hardness of the washing machine as described below. Turn on the machine by rotating the knob on any programme Press and hold “Dosing Aid“ and “+” buttons simultaneously for a few seconds. A horizontal bar appears on the display. This is the symbol for SOFT water hardness level. Press the button marked with “+“ or “-” to eventually adjust the water hardness to “medium“ or “hard“. Press “Ok” to confirm and save. Soft Medium Hard GB 5019 106 01525 Dosing Aid - DAILY USE Load the washing machine with laundry. Select the desired programme. Add any options, and set a start delay if desired. Select “Dosing Aid” and start the washing machine. After approximately ten seconds the washing machine suggests the recommended detergent amount. Add the recommended detergent amount to the dispenser. Start the wash process. Press the “Dosing Aid” button. [. . . ] • If you load the drum with laundry which is already wet, do not use the full amount of detergent suggested by the “Dosing Aid” function. • The minimum wash load the “Dosing Aid” will identify is 2 kg, even for smaller loads below 2 kg. 04/11 - © Copyright Whirlpool Europe s. r. l. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL AWO/C 83121




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL AWO/C 83121 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.