User manual WHIRLPOOL FL 1029 L INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL FL 1029 L. We hope that this WHIRLPOOL FL 1029 L user guide will be useful to you.


WHIRLPOOL FL 1029 L INSTRUCTION FOR USE: Download the complete user guide (782 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL FL 1029 L MODE D'EMPLOI (730 ko)
   WHIRLPOOL FL 1029 L KURZANLEITUNG (267 ko)
   WHIRLPOOL FL 1029 L GEBRUIKSAANWIJZING (738 ko)
   WHIRLPOOL FL 1029 L BEDIENUNGSANLEITUNG (286 ko)
   WHIRLPOOL FL 1029 L INSTRUZIONI PER L'USO (744 ko)
   WHIRLPOOL FL 1029 L TABLEAU DE PROGRAMMES (265 ko)
   WHIRLPOOL FL 1029 L PROGRAM CHART (264 ko)

Manual abstract: user guide WHIRLPOOL FL 1029 LINSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] Adjustable feet 3 1 2 4 5 6 7 8 9 DOOR To open the single glass door hold the door handle, press the inside handle and pull the door up. Close the door with light force, it will lock home audibly. 21 6gb05022. fm Page 22 Tuesday, March 4, 2003 2:38 PM CHILD SAFETY (if available) To secure the appliance against improper use turn the plastic screw on the interior of the door. To do this, use the thick rounded corner of the coloured insert from the detergent dispenser or a coin: • Slot vertical: the door will not lock • Slot horizontal: the door can be locked again BEFORE THE FIRST WASH CYCLE To remove any residual water used in testing by the manufacturer, we recommend that you carry out a short wash cycle without laundry. Pour a little detergent (about 30 ml) into the detergent compartment . [. . . ] Insert the detergent dispenser in the washing machine. A A B1 B2 Mesh Filter in the Water Connection Check and clean regularly. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Pull off the mesh filter from the washing machine connection with universal pliers and clean it. Turn on the tap and ensure that the connections are completely water-tight. Clean the internal mesh filter and screw the water inlet hose back onto the tap. Turn on the tap and ensure that the connection is completely water-tight. 27 6gb05022. fm Page 28 Tuesday, March 4, 2003 2:38 PM TROUBLESHOOTING GUIDE Depending on the model, your washing machine is equipped with various automatic safety functions. This enables faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be solved within a few minutes. Press “Start/ Pause” button; • the “Rinse Hold” button is pushed, terminate this option by pressing the button again; • “On/Off” lamp is off. Press “On/Off” button; • the washing machine safety system has been activated (see fault description table). The appliance will not start, no lamp lights up. Check whether: Detergent and additive product residues in dispenser at end of wash. Check whether: • the siphon is correctly installed and clean (see “Care and Maintenance”); • enough water is being supplied. The mesh filters between the inlet hose and the tap could be blocked (see “Care and Maintenance”). Check and clean the filter two or three times a year (see “Removing the filter”). • the mains plug is inserted into the socket; • the wall socket is functioning correctly (use a table lamp or similar); • a programme is selected correctly; • the “On/Off” button (depending on model) has been pressed. The appliance will not start, but. . . (varies depending on model) . . . the “Start/Pause” lamp is flashing. Check whether: The appliance vibrates during the spin cycle. Check whether: • the appliance is levelled and solidly installed on all four feet (see “Installation Guide”); • the transit bolts have been removed. The transit bolts must be removed before the appliance can be used (see “Installation Guide”). • the appliance door is properly closed (child safety); • the programme has been changed; • the water tap is open. If not, open the tap and press the “Start/Pause” button. . . . the “On/Off” lamp is on. Check whether: Final spin results are poor: The appliance has an imbalance detection and correction system. If individual heavy articles are loaded (bathmat, bathrobe, etc. ) this system may reduce the spin speed automatically to protect the appliance or even interrupt the spin cycle altogether, if the imbalance is too high even after several spin starts. • If the laundry is still too wet at the end of the cycle, add smaller articles of laundry to balance the load and repeat the spin cycle. Ensure correct amount of detergent is used • the appliance door is properly closed (child safety); • a programme has been selected and the programme is started; • the water tap is open. If not, open the tap and switch the appliance first off, then on. The appliance stops during the programme (varies depending on model). Check whether: • the “Rinse Hold” lamp is on, terminate this option by pressing the button again; • another programme has been selected. Reselect the desired programme and press the “Start/Pause” button; No water or insufficient water supply: • the appliance has a safety hose and the safety valve has opened (red indicator in the safety valve inspector window). In this case replace it with a new safety hose. What should I do when the automatic safety system detects a malfunction?(varies depending on model) The programme is interrupted and various indicators (if available) point to the source of the fault. [. . . ] If the washing machine continues to function incorrectly, call After-Sales Service. • The service code (number after the word SERVICE). The After-Sales Service sticker is on the inside of the door. After-Sales Service numbers and addresses can be found in the guarantee booklet or contact the dealer. TRANSPORT/HANDLING Never lift the appliance by the worktop when transporting. 1. Drain residual water from the appliance and hoses (see “Removing The Filter”/”Draining Residual Water”). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL FL 1029 L




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL FL 1029 L will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.