User manual WHIRLPOOL GLS3665RS INSTALLATION

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL GLS3665RS. We hope that this WHIRLPOOL GLS3665RS user guide will be useful to you.


WHIRLPOOL GLS3665RS INSTALLATION: Download the complete user guide (428 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL GLS3665RS (257 ko)
   WHIRLPOOL GLS3665RS 4-09 (374 ko)
   WHIRLPOOL GLS3665RS INSTALLATION GUIDE (347 ko)
   WHIRLPOOL GLS3665RS (257 ko)
   WHIRLPOOL GLS3665RS 4-09 (374 ko)
   WHIRLPOOL GLS3665RS DIMENSION GUIDE (95 ko)
   WHIRLPOOL GLS3665RS INSTALLATION GUIDE (347 ko)

Manual abstract: user guide WHIRLPOOL GLS3665RSINSTALLATION

Detailed instructions for use are in the User's Guide.

[. . . ] If a gas leak is detected, follow the "What to do if you smell gas" instructions. It is the installer's responsibility to comply with installation clearances specified on the model/serial rating plate. Gas pressure regulator Burner grates Burner heads and caps Clamp brackets (2) 2¹/" (6. To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. [. . . ] In the absence of local codes, installation must conform with American National Standard, National Fuel Gas Code ANSI Z223. IMPORTANT: Leak testing of the range must be conducted according to the manufacturer's instructions. Natural Gas: This cooktop is listed by Underwriters Laboratories (UL/cUL) for use with Natural gas or, after proper conversion, for use with LP gas. to convert to LP gas , see the Gas Conversion instructions provided in the literature package. The model/serial rating plate located on the underside of the burner box has information on the types of gas that can be used. If the types of gas listed do not include the type of gas available, check with the local gas supplier. LP Gas conversion: Conversion must be done by a qualified service technician. No attempt shall be made to convert the appliance from the gas specified on the model/serial rating plate for use with a different gas without consulting the serving gas supplier. Electronic ignition systems operate within wide voltage limits, but proper grounding and polarity are necessary. check that the outlet provides 120-volt power and is correctly grounded. A smaller size pipe on longer runs may result in insufficient gas supply. With LP gas, piping or tubing size can be ½" minimum. Usually, LP gas suppliers determine the size and materials used in the system. The inlet pressure to the regulator should be as follows for proper operation: Natural Gas: Minimum pressure: 6" (15. 5 cm) WCP Contact local gas supplier if you are not sure about the inlet pressure. 3 cm) male pipe thread is needed for connection to the female pipe threads of the inlet to the appliance pressure regulator. Do not kink or damage the flexible metal tubing when moving the cooktop. All strains must be removed from the supply and fuel lines so cooktop will be level and in line. Must include a shutoff valve: The supply line must be equipped with a manual shutoff valve. This valve should be located in the same room but external to the cooktop opening, such as an adjacent cabinet. Line pressure testing above ½ psi gauge (14" WCP) The appliance and its individual shutoff valve must be disconnected from the gas supply piping system during any pressure testing of that system at test pressures in excess of ½ psi (3. Line pressure testing at ½ psi gauge (14" WCP) or lower The appliance must be isolated from the gas supply piping system by closing its individual manual shutoff valve during any pressure testing of the gas supply piping system at test pressures equal to or less than ½ psi (3. [. . . ] Apply pipe-joint compound made for use with LP gas to the larger thread ends of the flexible connector adapters (see B and F in the following illustration). Attach 1 adapter to the gas pressure regulator and the other adapter to the gas shutoff valve. Use a ¹/" combination wrench and channel lock pliers to attach the flexible connector to the adapters. Push in and turn the surface burner control knobs to the "HI" position. [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL GLS3665RS




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL GLS3665RS will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.