User manual WHIRLPOOL SUPER ECO 6412 INSTRUCTION FOR USE

DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!

If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL SUPER ECO 6412. We hope that this WHIRLPOOL SUPER ECO 6412 user guide will be useful to you.


WHIRLPOOL SUPER ECO 6412 INSTRUCTION FOR USE: Download the complete user guide (209 Ko)

You may also download the following manuals related to this product:

   WHIRLPOOL SUPER ECO 6412 KURZANLEITUNG (1156 ko)
   WHIRLPOOL SUPER ECO 6412 SCHEDA PROGRAMMI (789 ko)
   WHIRLPOOL SUPER ECO 6412 PRODUKTDATENBLATT (62 ko)
   WHIRLPOOL SUPER ECO 6412 BEDIENUNGSANLEITUNG (212 ko)
   WHIRLPOOL SUPER ECO 6412 TABLEAU DE PROGRAMMES (770 ko)
   WHIRLPOOL SUPER ECO 6412 PROGRAM CHART (131 ko)
   WHIRLPOOL SUPER ECO 6412 PRODUCT FICHE (60 ko)
   WHIRLPOOL SUPER ECO 6412 SCHEDA PROGRAMMI (789 ko)

Manual abstract: user guide WHIRLPOOL SUPER ECO 6412INSTRUCTION FOR USE

Detailed instructions for use are in the User's Guide.

[. . . ] DEFINITION OF USE This washing machine is exclusively destined to wash and spin machine washable laundry in quantities which are usual for private households. €¢ Observe the instructions given in these Instructions for Use, the Installation Guide and the Programme Chart when using the washing machine. €¢ Keep these Instructions for Use, the Programme Chart and the Installation Guide; if you pass on the washing machine to another person, also give him/ her Instructions for Use, Programme Chart and Installation Guide. Removing the packaging and inspection • After unpacking, make sure that the washing machine is undamaged. [. . . ] Do not machine wash fabrics that have been treated with solvents or flammable liquids. €¢ Do not use liquid detergent for the main wash when having activated the “prewash” option (if available on your model). €¢ Do not use liquid detergent when activating the “Start Delay” function (if available on your model). They depend on: • degree and type of soiling • size of wash - full load: follow the detergent manufacturer’s instructions. If there is no reference to a certain wash load on the detergent pack: the detergent manufacturers usually refer their dosing recommendations to 4. €¢ water hardness in your area (ask for information from your water company). Please note: Too much detergent can result in excess foam formation, which reduces washing efficiency. If the washing machine detects too much foam, it may prevent spinning, or prolong the programme duration and increase the water consumption (see also remarks on foam formation in the “Troubleshooting Guide”). - Remove the plinth by using the siphon of the detergent dispenser: push downwards one side of the plinth with your hand, then push the siphon’s nose into the gap between plinth and front panel and pry open the plinth (picture “B”). - If there is no emergency drain hose: place a broad, flat container beneath the filter (picture “D”). Hold the emergency hose’s end into the container and remove the stopper (picture “C”). Wait until all the water has drained, then refix the stopper at the hose’s end (picture “E”). Refix the emergency drain hose to the clip, or push it back into the washing machine’s base (depending on the model). Slowly open the filter by turning it counter-clockwise (picture “F”); wait until all the water has drained, then unscrew the filter completely and remove it. Tilt the appliance forwards carefully (a second person must help you) to allow the water to flow out completely. Clean the filter and the filter chamber; check that the pump rotor in the filter chamber moves freely. Pour about 1 litre of water into the detergent dispenser to reactivate the “Eco system”. Check that the filter is inserted properly and securely and no water comes out. Reinstall the plinth (picture “G”); if necessary, tilt the washing machine slightly backwards for doing that (a second person must help you). GB 6 A B C D E F G CARE AND MAINTENANCE Appliance exterior and control panel • Wash down with a soft, damp cloth; if necessary use a neutral detergent (non abrasive). Door seal Appliance interior • After each washing, leave the door open for some time to allow the inside of the appliance to dry. €¢ If you never or seldom wash your laundry at 95°C, we recommend to occasionally run a 95°C programme without laundry, adding a small amount of detergent, to keep the interior of the appliance clean. [. . . ] If your washing machine has a “Dosing Aid” function, and you used it: check if the dosing values set for the different programme groups correspond to the dosing values recommended for the detergents you use (see details in separate Instructions for the “Dosing Aid”). • Select and start the “Rinse & Spin” programme. €¢ Afterwards select and start the desired programme again, using less detergent. €œF02” or “FA” “Service” “F18” or “FoD” If any of the faults described above persist, unplug the appliance, turn off the water tap and contact our After-Sales Service (see next chapter). [. . . ]

DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL SUPER ECO 6412




Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL SUPER ECO 6412 will begin.

 

Copyright © 2015 - manualRetreiver - All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.