User manual WHIRLPOOL W8TXNGZBB USE & CARE GUIDE
DON'T FORGET : ALWAYS READ THE USER GUIDE BEFORE BUYING !!!
If this document matches the user guide, instructions manual or user manual, feature sets, schematics you are looking for, download it now. Diplodocs provides you a fast and easy access to the user manual WHIRLPOOL W8TXNGZBB. We hope that this WHIRLPOOL W8TXNGZBB user guide will be useful to you.
You may also download the following manuals related to this product:
WHIRLPOOL W8TXNGZBB ENERGY GUIDE (1680 ko)
WHIRLPOOL W8TXNGZBB DIMENSION GUIDE (87 ko)
WHIRLPOOL W8TXNGZBB WARRANTY INFORMATION (101 ko)
Manual abstract: user guide WHIRLPOOL W8TXNGZBBUSE & CARE GUIDE
Detailed instructions for use are in the User's Guide.
[. . . ] U-Line products are making life more convenient in homes, businesses, and hotels around the world. U-Line supports its products with a strong dealer network, and its commitment to quality even extends to environmentally safe packaging.
IMPORTANT
READ all of the instructions in this guide completely before operating the unit for the first time. If you need additional information or assistance, please contact U-Line Corporation directly. If you have a problem with the operation of this product, the SERVICE section of this guide will assist you in quickly identifying common problems and provide information on possible causes and remedies. [. . . ] During periods of non-use, the cabinet must remain open to prevent the formation of mold and mildew. (5 cm) to provide the necessary ventilation.
Food Storage
Crisper
Your models may have a lower crisper drawer for storage.
Product Disposal
If the unit is being removed from service for disposal, check and obey all Federal, State and/or Local regulations regarding the disposal and recycling of refrigeration appliances, and follow these steps completely: 1. Disconnect power to the unit and unplug the power cord from its outlet.
ULIN_0209_A
Figure 7 To open, grasp the crisper handle (Figure 7) and slowly pull out to access the drawer contents. The crisper may be completely removed for cleaning.
IMPORTANT
If the drawer is pulled out too far, it will come out of the cabinet, and may be damaged by falling.
DANGER
RISK OF CHILD ENTRAPEMENT. Before you throw away your old refrigerator or freezer, take off the doors and leave shelves in place so that children may not easily climb inside. Remove the cabinet door.
2115R, 2175R
9
6 Cleaning and Maintenance
Maintenance
Proper maintenance of your U-Line product will ensure efficiency, top performance and long life. You may want to shorten the intervals if you have pets or other special considerations.
General Cleaning
Exterior Cleaning (As Required)
Black and White Models: · Surfaces may be cleaned with a mild detergent and warm water solution. Stainless Steel Models: · Stainless steel surfaces and components can discolor when exposed to chlorine gas, pool chemicals, salt water or cleaners with bleach. · Keep your stainless steel unit looking new by cleaning with a good quality all-in-one stainless steel cleaner/ polish on a monthly basis. For best results use Claire® Stainless Steel Polish and Cleaner, which can be purchased from U-Line Corporation (P/N 173348). Frequent cleaning will remove surface contamination that could lead to rust. NOTE: Screws are held in the grille by o-ring retainers, and will not come free of the grille. If the unit is not level, adjust the feet on the corners of the unit as necessary (Figure 11). Check the levelness after each adjustment and repeat the previous steps until the unit is level.
WARNING
DO NOT touch the condenser fins. The condenser fins are SHARP and can be easily damaged.
2115R, 2175R
11
Door Alignment Check and Adjustment
IMPORTANT
When properly aligned: · The door will not be flush with the top of the cabinet. · The door gasket will be firmly in contact with the perimeter of the cabinet and not pinched on the hinge side of the door. If door edge opposite the hinges needs to move up, move plate toward outside of door (Figure 14, 2). If door edge needs to move down, move plate toward inside of door (Figure 14, 3). Repeat until top edge of door is parallel with top of cabinet and tighten screws securely (Figure 14, 1).
1/8" (3. 175 mm)
ULIN_0016_A
Figure 12 1. Compare the top edge of the door (opposite the hinges) to the top edge of the cabinet (Figure 12) and note the type (up or down) of adjustment needed.
ULIN_0133_A
Figure 13 2. Remove the top hinge pivot pin with a Phillips screwdriver (Figure 13) and lift door off bottom hinge pin. Be careful not to lose the door closer insert sets.
1
ULIN_0004_A
Figure 15 5. [. . . ] Adjust door (See MAINTENANCE; DOOR ALIGNMENT CHECK AND ADJUSTMENT and DOOR REVERSAL). Check temperatures (See OPERATION for approximate temperatures) The unit frosts up.
Control set too cold
High ambient temperatures or humidity Door gasket not sealing properly Item(s) interfering with door
Noise during operation Refrigerator too cold
Copper water supply tubing contacting internal components Temperature control set too cold Inaccurate temperature reading
2115R, 2175R
17
Electronic Control Quick Guide
All Models Task Turn ON/OFF Touch Hold 10 seconds or
Touch and release
Touch Release when °F flashes. or
Touch to change temperature
Display or
Comment
Adjust Temperature
°F flashes after first touch, set-point saved after 5 seconds of inactivity and °F stops flashing. Blackout will end in 36 hours.
View Actual Temperature (T1) Change °F-°C Blackout Mode
Hold 5 seconds
Release when °F flashes.
Hold
Hold 10 seconds
Glass Door Models Task Touch Touch Display Comment Light normally goes on/off with door opening. [. . . ]
DISCLAIMER TO DOWNLOAD THE USER GUIDE WHIRLPOOL W8TXNGZBB
Click on "Download the user Manual" at the end of this Contract if you accept its terms, the downloading of the manual WHIRLPOOL W8TXNGZBB will begin.