User manual X10 CK18A

[. . . ] FireCracker ® Wireless Computer Interface Kit (includes CM17A, TM751, LM465, and HR12A) Model CK18A Controls up to 256 lights and appliances instantly from your PC, by remote control. Connects to your PC's serial port and has a pass-through port so you don't lose a port. [. . . ] Important: In order to control the Lamp Module or other X10 modules with the Firecracker software or PalmPad remote, you must plug in the TM751 Transceiver. Right-click on a label to type in the name of the light or appliance this button controls. Click to turn X10 Module on or off. If something was already plugged into this port, plug it into the FireCracker. Click on OK, a picture of an X10 PalmPad remote appears on your computer monitor. Use the on-screen remote control just like a regular remote control: Click on 1 to test the Transceiver, 2 to test the Lamp Module. Click to change the Housecode setting (set it to the same letter as your TM751 and X10 Modules). Click to control X10 Modules set to 1 thru 8 or 9 thru 16. For more information right-click on your mouse to access the extensive on-line help. This also accesses the Test Communications menu, which lets you change the COM port that the FireCracker works with. You can also print labels from here to match those on the on-screen PalmPad remote and place them on a physical PalmPad (included). You can also turn on or off sound effects that occur when you press buttons. Persons with physical disabilities who have software that can access their keyboard can simply "type" A 1 ON, for example, to turn on any X10 Module. LIMITED1-YEARWARRANTY X10. com, a division of X10 Wireless Technology, Inc. [. . . ] OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. ANY CHANGES MADE TO THE UNITS WILL VOID THE USER'S AUTHORITY TO OPERATE THE EQUIPMENT. [. . . ]