User manual X10 MC10A

[. . . ] You can turn on ALL lights connected to Lamp Modules and Wall Switch Modules with the push of a button if you hear a suspicious noise at night. You can even turn off everything in the system with one button to save energy. [. . . ] The Wall Switch Module turns on and off, and dims and brightens an incandescent light up to 500 watts, which is normally operated by a wall switch. Set the Housecode dial To turn ON a light or appliance Press and release the TOP of one of the 4 number keys corresponding to the Unit Code set on the Module to be controlled. all lamps connected to Lamp Modules or Wall Switch Modules set to the same House Code) press the TOP of the All Lights On/All Units Off key. This key does not affect Appliance Modules. To turn OFF a light or appliance Press and release the BOTTOM of one of the 4 number keys corresponding to the Unit Code set on the Module to be controlled. Setting up the Mini Controller 1. To install your Mini Controller, simply plug the power cord into any functioning wall outlet. Set the slide switch on the top of the Mini Controller for the Modules you want it to control (1 thru 4 or 5 thru 8). Using a small screwdriver, choose one the 16 letters on the Mini Controller's Housecode dial. Set the Mini Controller and all the Modules to be controlled by it to the same Housecode letter. To turn off all modules, including Appliance Modules, press the bottom of the All Lights On/All Units Off key. To Dim or Brighten lights Press and release the TOP of the number key for the Lamp Module or Wall Switch Module you want to Dim or Brighten (you can't Dim or Brighten Appliance Modules). Then press the TOP of the Dim/ Bright key to Brighten or the BOTTOM of the Dim/Bright key to Dim the light. Hold the key pressed until the desired brightness level is reached. Problem Solving If a particular module won't go on or off from the buttons on the Mini Controller: Check that you have power to the outlet controlling the Module and the switch on the light or appliance is ON. The Housecode on the Module and the Mini Controller must be set to the same letter. [. . . ] Limited One Year Warranty X10. com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. [. . . ]