User manual ZALMAN ZM-NB32J

[. . . ] ZM-NB32J does not require a fan, thus it does not need to be powered, nor does it create noise or vibration. [. . . ] 4) After pressing the ZM-NB32J onto the northbridge chipset firmly, lay the mainboard evenly for 15 minutes for the adhesive to cure before using the computer. Caution) 1) The heatsink attached with thermal adhesive cannot be removed afterwards. In case of contact, clean off promptly with water, and contact your physician thereafter if it went into your eyes. 2. Using Push Pins Push Pin Link Tapered Spring Nut Bolt Groove Assembly 1. Insert the head of the bolt into the groove under the bolt hole on the link and screw on the nut as shown in the diagram. Then, assemble the push pin and the spring onto the link. The end of the tapered spring having a smaller dlameter should be directed to the head of the push pin as shown in Figure. ) Screw Driver 2. Insert the assembly into the groove on the heatsink by the direction of the arrow after adjusting the nut to appropriate height as shown in the diagram. Thermal Grease Northbridge Chipset 3. Align the push pins on the assembly with the holes on the mainboard and tighten the bolts so that they won't move. 4. [. . . ] * The specifications of any product may change without prior notice to improve the performance thereof. www. zalman. co. kr [. . . ]