User manual ZENITH IQB27FW

[. . . ] Color Television OWNER'S MANUAL MODEL : CP-29Q12P Please read this manual carefully before operating your set. See the label attached on the back cover and quote this information to your dealer when you require service. Internet Home Page : http://www. lge. co. kr P/N : 3828VA0187B (MC996A) Safety Precautions WARNING : TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER(OR BACK). Cleaning Unplug this television receiver from the wall outlet before cleaning. [. . . ] To select the favorite channel, repeatedly press the FCR (Favorite Channel Review) button. Five channels programmed appear on the screen one by one. +MOVE+{+NEXT CHANNEL CH. INPUT+++++++{ AUTO+PROGRAM{ MANUAL+PROG. { FINE++++++++{ FAVORITE+CH. { + TV + 69+ TVVVVV03VVVV TVVVVV10VVVV CATVV111VVVV CATVV125VV }{+MOVE+++ADJUST++Å +BACK Zoom Picture You can select the desired picture format (NORMAL, ZOOM IN or ZOOM OUT). · NORMAL : · ZOOM IN : This picture format is 4 to 3 of general TV. This screen is magnified to the upper/lower sides through ZOOM screens one by one. Each time press this button, the screen is more magnified than the previous screen. Press the F / G or ZOOM IN/OUT button to select your desired picture format. SSSZOOM SS131}{ SSSZOOM S - __31}{ 13 Picture control Enjoying the Eye Function The set will automatically adjust the picture according to the surrounding conditions with the display MAGIC EYE. The display MAGIC EYE appears and the picture is adjusted automatically. AMBIENCE CHROMA CONTRASTOO 85 BRIGHTNESSO 54 COLORO O O O 50 SHARPNESSO 50 +++MAGIC+EYE MAGIC+EYE Auto Picture Control You can select picture modes programmed at factory as you prefer. Using the APC button 1. Press the D / E or APC button to select MAGIC EYE, CLEAR, OPTIMUM, SOFT or USER. Press the ENTER (n) button to exit. AUTO +++AUTO+PICTURE CCLEAR Using the MENU button 1. Press the D / E button to select MAGIC EYE, CLEAR, OPTIMUM, SOFT or USER. Press the ENTER (n) button to exit. CH. PICTURE AUTO+PICTURE{ MAGICOEYE CLEAR YNR+++++++++{ CLEAR USER+CONTROL+{ OPTIMUM SOFT USER YNR (Luminance Noise Reduction) To reduce the picture noise which may appear on the screen during watching the TV in a weak signal area. YNR ON : The picture noise is reduced, on the other hand the resolution is poor. YNR OFF : The resolution is good when there is no picture noise. +MOVE+}BACK PICTURE CH. AUTO+PICTURE{ YNR+++++++++{ ON USER+CONTROL+{ OFF +MOVE+}BACK Adjusting the Picture This is the function to manually adjust the desired picture levels (CONTRAST, BRIGHTNESS, COLOR, TINT, SHARPNESS) of the screen as you like. If the picture you set is not satisfactory, you can select a factory preset picture. Press the ENTER (n) button to exit. PICTURE CH. AUTO+PICTURE{ YNR+++++++++{ USER+CONTROL+{ CONTRASTOOO{ BRIGHTNESS+{ COLOR+++++++{ TINT+++++++{ SHARPNESS++{ +MOVE+{NEXT+}BACK 14 Sound control Enjoying the Stereo/SAP Broadcast This TV set can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program, as the system to be transmitted one additional sound signal as well as the original one. MTS function doesn't operate in the video mode. Using the MTS Button 1. Each time you press this button or the D / E button, the MONO, STEREO or SAP mode appears in turn. Press the ENTER (n) button to exit. SSSSMTS SS1MONO1 Using the MENU Button 1. Notes: ·The stereo or SAP can be broadcast only when the TV station transmits its signal even though you have selected STEREO or SAP. · The mono sound is automatically broadcast in case of mono broadcast even when the STEREO or SAP has been selected. · Select MONO if you want to listen to the mono sound in the fringe area during stereo/SAP broadcasting. SOUND CH. MTS+++++++++{ DASP++++++++{ AUTO+VOLUME+++{ USER+CONTROL+{ +MOVE+{NEXT SOUND CH. MTS+++++++++{ MONO DASP++++++++{ STEREO AUTO+VOLUME+++{ SAP USER+CONTROL+{ +MOVE+}BACK AVL (Auto Volume Leveler) AVL automatically keeps on an equal volume level even if you change channels. Using the AVL Button 1. Press the ENTER (n) button to exit. AUTO SSSOAUTOOVOLUME SON1 SOUND CH. Using the MENU Button 1. [. . . ] Remove the 300 to 75 ohm adapter or the cable from the set if attached. Connect the CATV cable (75 ohm coaxial cable) to the 75 ohm antenna jack. 22 Connection of external equipment S-INPUT JACK S-INPUT EARPHONE S-INPUT COMPONENT INPUT (R)-AUDIO-(L) VIDEO 6 VIDEO AUDIO OUT 5 Y 4 (L) VIDEO L/MONO - AUDIO - R 2 ANT IN IN 2 Cb IN 1 (MONO) Cr (R) 3 IN3 IN 4 S-OUT 1 S-OUT JACK 1. IN 1 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these inputs. IN 2 JACKS : Connect external equipment outputs (VCR, LASER DISC, CAMCORDER) to these inputs. [. . . ]