User manual ZIBRO PX150

[. . . ] » Control panel Cool air outlet Handle Casters ´ ² Connection tube Handle of outdoor unit ¶ º ¾ Exhaust air outlet Air inlet Power cable compartment µ ¸ ¹ Power cord Cord hanger Connection box Active carbon filter Bracket fro mounting outdoor unit Spanners Spacer, screws, protection caps Remote controller Congratulations on the purchase of your Zibro Clima air conditioner. In addition to air cooling, this air conditioner has two other functions, namely air dehumidification and circulation. the mobile Zibro Clima air conditioner is extremely easy to operate and move. You have acquired a high quality product that will provide you with many years of pleasure, on condition that you use it responsibly. [. . . ] Set the unit to maximum cooling and high-speed fan initially, then adjust the unit to a comfortable setting. The unit selects the mode depending on the room temperature: higher than 23°C, cooling mode; between 20°C and 23°C, fan mode. 5 Temperature selection Set the temperature that must be maintained (in the range from 16°C to 30°C) with switched 6 Digital display When the unit is ON the display shows the room temperature ( or to see the set temperature ( room temperature will again be displayed. 7 `SLEEP' setting This setting can only be used when the cooling function is activated. Every hour the temperature setpoint will raise with 1°C, after 2 hours the temperature remains the same. Remote control The air conditioner can be operated with remote control. The compressor has been set so that it starts functioning three minutes after the (re)start of the air conditioner. The cooling will switch off when the room temperature is lower than the set one. When the room temperature rises above the selected value, the cooling will work again. While using the heating function during low temperatures, heating will occasionally stop for a while in order to melt the internal frost. The Zibro Clima comfort line air-conditioners are equipped with a 3 layer filter package to clean the circulated room air. The Active carbon sheet can be cleaned with a vacuum cleaner when dusty but has to be changed at the same time as the 3M Filtrete filter. the positive/negative electro statically charged 3M Filtrete filter is recommended to be changed every 3 months. Unusual dirt, construction work, pets, the presence of smokers and running the air-conditioning unit continuously can shorten the life time of the 3M Filtrete filter. To run the unit without Active carbon sheet and/or 3M Filtrete package does not bring any harm to the air-conditioner. The condensed water will be discharged from the hole placed at the back of the indoor unit. If the indoor unit needs to be disconnected from the outdoor unit, to place it in a more suitable position, follow these steps: Disconnecting 1 Open the tube connection box (12) situated at the back of the indoor unit. The terminals are fitted with automatic self-sealing valves to prevent the gas from leaking. During the operation take extreme care not to break the refrigerant tubes. 5 Cap the terminals with the caps (16) provided to protect them from dust. [. . . ] 7 Transportation costs and the risks involved during the transportation of the air conditioner or air conditioner components shall always be for the account of the purchaser. To prevent unnecessary expense, we recommend that you always first carefully consult the instructions for use. Take the air conditioner to your dealer for repairs if these instructions do not provide a solution. To be used as indication, subject to modifications Cooling capacity * - enthalpy difference (nom) - enthalpy difference - conform EC regulation Power consumption Current nom. [. . . ]